快乐时时彩

Industry news

Position:Home > News > Industry news

  • Technical requirements for repairing welding of mechanical processing in Hangzhou
  • Editor:Hangzhou Yu Chen Machinery Co., Ltd.Date:2017-08-11 10:40 Click:

Hangzhou machined Hangzhou mechanical processing manufacturers today to take people to understand the requirements for repair welding technology:

1, the defects must be thoroughly removed before repair welding, and the groove surface should be smooth and smooth without any sharp corners.

2. According to the defects of the steel castings, the defects in the repair welding area can be removed by digging, grinding, carbon arc gouging, gas cutting or machining.

3. The dirt, oil, water, rust and other dirt within 20mm within the welding area and groove must be thoroughly cleaned up.

4. During the whole process of repair welding, the temperature of the preheating zone of the steel castings should not be lower than 350° C.

5, if conditions permit, welding as far as possible at a horizontal position.

6. When welding is done, the electrode should not be swung too much.

7. When the surface welding of steel castings is done, the overlap between the welds shall not be less than 1/3 of the weld width.

友情链接:天天彩票  港龙彩票注册  天天彩票  98彩票官网  蚂蚁彩票  港龙彩票  98彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!